M18 x 1.5mm - 31mm Diameter Breather Cap with Splash Guard and Flat Dipstick

M18 x 1.5mm - 31mm Diameter Breather Cap with Splash Guard and Flat Dipstick PRODUCT CODE - SFP.30-18x1.5+a

Manufacturer Code - 53966

£4.02Ex. VAT£4.82Incl. VAT

QTY

Breather Caps with Splash Guard and Flat Dipstick

Material
Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.

Cover: RAL 2004 orange, semi-matte finish, marked “OIL”.
Threaded connector: black, semi-matte finish.

Packing ring
NBR synthetic rubber.

Flat dipstick
Flat section phosphatised steel.
On request and for sufficient quantities dipstick can be supplied in different lengths and/or complete with MAX-MIN level lines.

Splash guard
Technopolymer.

Standard executions

SFP+a: without air filter (black splash guard).
SFP+F+a: D = 31, 42 and 57 with “tech-fil” air filter in zinc-plated steel wire (orange splash guard); D = 70 with “tech-foam” air filter in polyurethane foam mesh (polyester base), air filtration 40 µ (grey splash guard).
SFP.70-BA+F+a: with “tech-foam” air filter in polyurethane foam mesh (polyester base), air filtration 40 µ (grey splash guard).

Zinc-plated steel sheet bayonet.
Chrome-plated steel safety chain.
Maximum continuous working temperature
100°C.

If you are looking for something that isn’t our breather caps you’re struggling to find it, please don’t hesitate to contact us.

❗Please Note – Important Information About Product Availability

Stock levels not shown online – we’ll confirm availability after you place your order.
If your order is required urgently, please call our customer service team for advice before placing your order on 01472 255928.
Delivery Info – Standard delivery in 1–3 working days
– Orders placed before 2pm are usually dispatched the same day
(Please check stock levels with our customer service team before ordering)
– Larger or made-to-order items may take longer
– Shipping costs calculated at checkout
– Free delivery available on most orders over £150 to UK mainland*
Returns Policy – 14-day returns on most items
– Items must be unused and in original packaging
– Custom-made products and certain other ranges are non-returnable
– A standard re-stocking fee of 30% applies for all items
– Email us at hello@hydraulicmegastore.com to start a return
Need Help?
Call us on 01472 255928 or email us at hello@hydraulicmegastore.com– we’re happy to assist.

Related products